10.13.10. Replacement of a lamp in an additional signal of braking
SEQUENCE OF WORKS
|
Fig. 9.27. Replacement of a lamp of an additional signal of braking practically does not require the tool. On new models of the E-class in an additional signal of braking light-emitting diodes which replacement also does not cause special difficulties are established
|
1. Press latches on the right and at the left and remove the external case. On T-model remove an upholstery of a door (fig. 9.27).
2. Press a latch on a reflector and remove a reflector.
3. Press a lamp down in the boss a little, turn to the left (counterclockwise) and take out from the boss.
4. At installation you watch that the lamp at turn clockwise (to the right) accurately entered gearing.