10.13.9. Removal of a back lamp
SEQUENCE OF WORKS
|
The block of a back lamp in a body
1. Open a luggage carrier or a back door (station wagon).
2. Open sideways a lamp cover in an upholstery. On T-model take out together with covers a spare wheel (at the left) or the first-aid kit.
3. From within turn off three nuts on lamp perimeter.
4. Carefully together with a sealant take out a lamp outside from an opening in a body and disconnect the contact socket.
Fig. 9.26. Before installation of a back lamp clear a seat on a body and replace with a new worn-out sealant (arrows)
|
5. Before installation clear a seat on a body and if the sealant is worn-out, replace it with new (fig. 9.26).
The block of a back lamp in a luggage carrier cover / a back door
1. Open a luggage carrier or a back door (station wagon).
2. Remove caps of a back lamp in an upholstery of a luggage carrier or a door.
3. Remove fixture on perimeter and disconnect the contact socket.
4. Carefully take out a lamp outside from a trunk lid or a back door.