10.14.6. Removal of a sound signal
The contact of a sound signal is in a wheel of steering energized through a safety lock directly from the rechargeable battery. It means that even at the switched-off ignition when pressing the button of a sound signal the sound signal will be distributed. If there is no sound, it is necessary to check whether the device is really faulty.
SEQUENCE OF WORKS
|
Fig. 9.31. On cars with the conditioner the signal (shooter) established before a radiator is available only after removal of a protective lattice
|
1. For removal of the signal located before a radiator open a cowl and remove a protective lattice of the electric fan (on cars with the conditioner) on facing of a radiator. For removal of the signal fixed from below a bumper, install the car on support and remove the lower protection of a motor compartment (fig. 9.31, 9.32).
Fig. 9.32. For troubleshooting of the sound signal fixed from below a bumper at first it is necessary to remove the lower protection of a motor compartment
|
2. Turn off a nut of fastening of a signal.
3. Take out the contact socket and remove a signal.