11:18. Removal of facing of the control unit of a heater
SEQUENCE OF WORKS
|
1. Remove an ashtray with a box for points.
2. Remove the radio tape recorder. For this purpose use the removable tool.
Fig. 10.35. The removed handles rotary regulyatorov:1 – the fan regulator with the switch; 2 – regulator of air streams; 3 – facing of the control unit of a heater
|
3. Pull together handles of rotary regulators (fig. 10.35).
4. Unscrew two screws over a box for points.
5. Raise facing from below forward until it cannot be unfastened above.
6. Take out a level of switches from gearing. At assembly lay wires sideways.