357217bd 357217bd

5.6.5. Replacement of the muffler

1. Remove back parts of system of production of the fulfilled gases.
2. Put the spare muffler with branch pipes on old.
3. Put joints of final parts of the muffler so that cuts on a reciprocal part were moved on 70–80 mm.

Fig. 4.106. Rubber suspension bracket

4. When checking do not forget to check a back suspension bracket of the muffler (fig. 4.106) for wear of a rubber suspension bracket (arrow). If rubber is torn, then the most part of system of release will keep only on a suspension bracket in front.